Runco VX-40d Manuel d'utilisateur télécharger pdf (Page 46)

Installation

34 Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual

PRE

IMINAR

RS-232 Controller

Connection

Use a standard, 9-pin RS-232 cable to connect a PC or home theater control/automation

system (if present) to the RS-232 Control port on the DHD Controller; see

Figure 3-13.

For more information about using this connection, refer to Serial Communications on

page 83.

Figure 3-13. RS-232 Control System Connection

Connecting 12-Volt

Trigger Outputs to

External

Theater

Components

If your VX-40d/-50d/-60d/-80d is equipped with a CineWide with AutoScope system,

connect the AutoScope lens motor to a 12-volt trigger output on the DHD Controller; see

Figure 3-14.

Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or

screen masks) to the other trigger outputs.

➤

Pb Pr Y

Video

RS-232 Control

S-Video 1

S-Video 2

TRIGGERS

RS-232 OutComponent Video

345

to Automation/

Control System

or PC

2 Transmit Data

3 Receive Data

5 Ground

(none of the other pins are used)

➤

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 107 108

Pas de commentaire

Runco VX-40d Manuel d'utilisateur Page 46