Runco VX-2000d Manuel d'utilisateur télécharger pdf (Page 56)

Operation

44 Runco VX-2000d Owner’s Operating Manual

PRE

IMINAR

Select Color and press ENTER. While looking at the color bar pattern through a blue filter,

adjust the color saturation level until the outermost (gray and blue) color bars appear to be

a single shade of blue:

Tint: Tint or “hue” is essentially the ratio of red to green in the color portion of the image.

When tint is decreased, the image appears redder; when it is increased the image

appears greener. To set the tint, select Tint and press ENTER. While looking at the color

bar pattern through a blue filter, adjust the tint level until the cyan and magenta color bars

(on either side of the green bar) appear to be a single shade of blue.

Like the brightness and contrast controls, the color and tint controls

are interactive. A change to one may require a subtle change to the

other in order to achieve the optimum setting.

gray

yellow

cyan

green

magenta

red

blue

Note

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 87 88

Pas de commentaire

Runco VX-2000d Manuel d'utilisateur Page 56