Runco VX-2000d Manuel d'utilisateur télécharger pdf (Page 36)

Installation

24 Runco VX-2000d Owner’s Operating Manual

PRE

IMINAR

3.4

Mounting the

VX-2000d

There are several methods for mounting the projector. Depending on your chosen

installation, one method may be more suitable than another.

Floor Mounting (Upright) In typical front and rear screen installations, the projector can be mounted to a secure and

level surface such as a table or cart. Carts are useful when moving a projector during a

presentation or from site to site. If possible, lock the wheels when it’s in position to prevent

it from being moved during a presentation.

Ceiling Mounting

(Inverted)

For fixed installations, and for those that want the projector out of sight or have a limited

space for projector and audience, you can invert the VX-2000d and suspend it from the

ceiling using a specially-designed ceiling mount fixture.

The projector can also be inverted and placed in an enclosure above and behind the

viewing area. Install four feet on the inside bottom surface of the enclosure on which the

projector can rest. A variety of materials can be used for this purpose (for example, rubber

crutch tips or turntable feet).

Adjusting the Projection

Angle

If the VX-2000d is ceiling-mounted and the screen is significantly lower than the projector,

you can tilt the projector at a slight angle by adjusting the ceiling mount.

If you do this, you may need to shift the image using the OSD controls, to compensate.

For detailed instructions, refer to

Using the On-Screen Menus on page 37.

➤

Use only the Runco-approved ceiling mount kit designed for your

projector. Install the mount kit according to the instructions

provided with it.

Note

➤

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 87 88

Pas de commentaire

Runco VX-2000d Manuel d'utilisateur Page 36