Runco VX-2000d Manuel d'utilisateur télécharger pdf (Page 58)

Operation

46 Runco VX-2000d Owner’s Operating Manual

PRE

IMINAR

Overscan: Image Overscan pushes the outside edge of the active picture area of the

video signal out beyond the edge of the display area.

Some television programs are produced based on the assumption that older television

sets may not display the outer edges of the broadcast picture area. Overscan effectively

trims away these inactive, outer edges and enlarges the remaining portion of the image to

fill the display area.

Select from 1% to 10% of Overscan, as desired.

For HDTV, DVDs and other video sources, Overscan is generally not necessary or

desirable.

ISF Presets For each input, the VX-2000d lets you save image quality settings as presets that you can

recall at a later time. You can create up to four presets per input and resolution. Use the

ISF Presets menu to recall saved image presets, or to save image settings in the

“Custom

1” or “Custom 2” memory location. The currently-selected preset is indicated by

a “

7” to its left; in the example shown here, ISF Night is selected.

You should save changes to any of the following settings to a preset; otherwise they will

be lost when a new input source or resolution is selected:

• Aspect ratio

• Picture quality settings (brightness, contrast, color saturation, tint and sharpness)

• Input position (image position, width, height and overscan percentage)

To reset the Custom 1 and Custom 2 image presets to their factory defaults, select

Factory Default and press ENTER.

Information Select Information from the Main Menu to see information that uniquely identifies your

projector: its serial number, the installed hardware and firmware versions and the firmware

version build date. Should you ever need to contact Runco Technical Support, this

information will help them answer your questions or resolve product performance issues.

ISF Presets

ISF Night



ISF Day



Custom 1 Save



Custom 2 Save

Factory Default

➤

Information

Serial Num

Hardware 0

Firmware 0100.001A

Date Oct 19 2006

➤

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Runco VX-2000d Manuel d'utilisateur Page 58

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs Runco VX-2000d