Runco VX-2000d Manuel d'utilisateur télécharger pdf (Page 51)

Operation

Runco VX-2000d Owner’s Operating Manual 39

PRE

IMINAR

Main MenuThe Main Menu is the starting point for accessing all projector functions.

(The Calibration and Service menus are hidden and not accessible until you enter a

passcode.)

Input SourceFrom the Main Menu, select Input Source to choose a video signal source.

The active source is indicated by an arrow (>) to its left; in the example at right, Composite

is the active source.

Aspect Ratio To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio

from the Main Menu and press ENTER. Select the appropriate aspect ratio for your

screen size and the type of program material being viewed; refer to

Table 4-1.

The currently-selected aspect ratio is indicated by a “7” to its left; in the example at right,

Anamorphic is selected.

Runco Video

Input Source

Aspect Ratio

Picture

Input Position

ISF Presets

Information

Calibration

Service

Input Source

Composite

S-Video 1

S-Video 2

Component SD

HD/RGB 1

HD/RGB 2

HDMI 1

HDMI 2

Aspect Ratio

Anamorphic



Standard 4:3



Letterbox



VirtualWide



Cinema



Virtualwide 2.35

When you change the aspect ratio, save the change to a preset

afterwards. Otherwise, the change will be lost when a different

input is selected. (The aspect ratio is saved for each input and

resolution separately.) For information about saving settings, refer

ISF Presets on page 46.

Note

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Runco VX-2000d Manuel d'utilisateur Page 51

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs Runco VX-2000d