Runco QUANTUM COLOR Q-750I Spécifications télécharger pdf (Page 37)

Installation

Q-750i Series Installation/Operation Manual 21

PRE

IMINAR

Remove Projector Front Feet:

Place the projector upside down on a

blanket or other soft surface. Loosen

and remove the two front feet on the

projector.

Install Ceiling Mount Adapters/Projector Stands: For ceiling installations, these

brackets bring the mounting points for the projector mounting plate (included with the

projector ceiling mount kit) from the bottom of the projector up and around the AutoScope

lens motor housing. For floor installations (where the projector is upright), the adapters

allow the projector to lie flat on the mounting surface.

Using six (6) each of the supplied, M6 x 12mm Pan-Head Phillips screws (item #2), attach

the AutoScope Ceiling Mount Adapters/Projector Stands (items #3 and

#4) to the

projector as shown in

Figure 3-7.

Remove

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 107 108

Pas de commentaire

Runco QUANTUM COLOR Q-750I Spécifications Page 37