Runco LIGHTSTYLE LS-HB Manuel d'utilisateur télécharger pdf (Page 44)

Installation

28 Runco LS-HB Installation/Operation Manual

PRE

IMINAR

Adjusting the Projection

Angle

If the screen is significantly higher or lower than the projector, you can also tilt the

projector at a slight angle. In a ceiling installation, you do this by adjusting the ceiling

mount.

For a floor installation, turn the adjustable feet at the bottom of the projector to adjust the

projection angle.

The projector can be rotated (side-to-side) up to 360 degrees and mounted without it

affecting performance. However, to ensure optimal performance of the lamp, limit the

front-to-back tilt of the projector to ±20 degrees; see Figure 3-7.

Figure 3-7. Mounting Angle Ranges (Side-to-Side and Front-to-Back)

If you do this, you may need to vertically shift the image to compensate. For detailed

instructions, refer to Primary Lens Adjustments on page 38.

➤

± 360º

± 20º

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 109 110

Pas de commentaire

Runco LIGHTSTYLE LS-HB Manuel d'utilisateur Page 44