Runco LIGHTSTYLE LS-HB Manuel d'utilisateur télécharger pdf (Page 42)

Installation

26 Runco LS-HB Installation/Operation Manual

PRE

IMINAR

Installing the Fixed

Anamorphic Lens Base

Plate

To install the base plate on an LS-HB with a fixed anamorphic lens:

1. Place the projector upside down on a blanket or other soft surface.

2. Secure the base plate and Ceiling Mount Plate (if used) to the projector with the four,

M4 x 0.7 x 14mm screws provided with the anamorphic lens base plate.

Figure 3-6. Projector with Fixed Anamorphic Lens Base Plate - Bottom View

➤

1. Do not use the mounting screws provided with the ceiling

mounting kit. Use only the hardware provided with the

anamorphic lens base plate.

2. DO NOT OVER-TIGHTEN THE SCREWS.

Caution

Ceiling Mount Plate

(part of Ceiling Mount Kit)

Anamorphic

Lens Base Plate

Screw,

Phillips

Pan-Head,

M4 x 0.7 x

14mm (4x)

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 109 110

Pas de commentaire

Runco LIGHTSTYLE LS-HB Manuel d'utilisateur Page 42