Runco VX-60d Spécifications télécharger pdf (Page 74)

Operation

58 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual

PRE

IMINAR

Contrast: On your external test pattern source, select a stepped, gray-bar pattern like the

one shown in Figure 4-3.

Figure 4-3. Typical Gray Bar Pattern for Adjusting Contrast

Select Contrast and press ENTER. Adjust the contrast to a point just below which the

white rectangle starts to increase in size.

Color Saturation: On your external test pattern source, select a color bar pattern like the

one shown in Figure 4-4.

Figure 4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint

1. Press the MENU button on the remote control or DHD Controller front panel.

2. Select Service from the Main Menu and press ENTER.

3. Enter the Service menu passcode.

4. Select Display Device from the Service menu and press ENTER.

5. Press ENTER again to select Configure.

Brightness and contrast controls are interactive. A change to one

may require a subtle change to the other in order to achieve the

optimum setting.

Note

gray

yellow

cyan

green

magenta

red

blue

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 125 126

Pas de commentaire

Runco VX-60d Spécifications Page 74