Runco 3DIMENSION D-73D Spécifications télécharger pdf (Page 88)

Operation

72 D-73d Series Installation/Operation Manual

PRE

IMINAR

Color Saturation: On your external test pattern source, select a color bar pattern like the

one shown in Figure 4-4.

Figure 4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint

1. Press the MENU button on the remote control or DHD Controller front panel.

2. Select Service from the Main Menu and press ENTER.

3. Enter the Service menu passcode.

4. Select Display Device from the Service menu and press ENTER.

5. Press ENTER again to select Configure.

6. Select Diagnostics and press ENTER.

7. Select Blue from the Diagnostics menu, then press ENTER to display only the blue

color channel.

8. Press EXIT (or MENU) repeatedly to return to the Main Menu.

9. Select Picture from the Main Menu and press ENTER.

10.Select Color from the Picture menu and press ENTER.

gray

yellow

cyan

green

magenta

red

blue

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 141 142

Pas de commentaire

Runco 3DIMENSION D-73D Spécifications Page 88