Runco 3DIMENSION D-73D Spécifications télécharger pdf (Page 51)

Installation

D-73d Series Installation/Operation Manual 35

PRE

IMINAR

D-73d/CineWide with Shasta Anamorphic Lens: Figure 3-10 shows the Shasta

anamorphic lens base plate assembly for a D-73d/CineWide.

Figure 3-10. D-73d/CineWide with Shasta Anamorphic Lens Base Plate -

Exploded View

To install the Shasta anamorphic lens base plate on a D-73d/CineWide:

1. Place the projector upside down on a blanket or other soft, flat surface.

2. Remove the two front feet from the projector.

3. Place the two rectangular spacers on the bottom of the projector as shown.

4. Place the CineWide base plate on top of the spacers.

5. Secure the base plate to the projector with the four (4) supplied, M5 x 0.8 x 20mm

Phillips screws.

6. Re-attach the front feet to the projector.

DO NOT OVER-TIGHTEN THE SCREWS.

Screw, Phillips

Pan-Head,

M5-0.8 x 20mm (4x)

CineWide

Base Plate

for Shasta

Lens

Rectangular

Spacer (2x)

Caution

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 141 142

Pas de commentaire

Runco 3DIMENSION D-73D Spécifications Page 51