Runco VX-2i Spécifications télécharger pdf (Page 25)

Controls and Functions

Runco VX-6000d Installation/Operation Manual 9

PRE

IMINAR

7. RIGHT BUTTON

Used to direct-select inputs or move the menu cursor right in the OSD. When no

menus are present on-screen, the RIGHT button toggles through the different

sources, in this order:

Composite Video - S-Video 1 - S-Video 2 - Component - HD 1 - HD 2 - SCART -

HDMI

1 - HDMI 2

8. MENU BUTTON

Press the MENU button to bring up the main menu, or to exit the current menu and

return to the previous one.

9. UP BUTTON

Use to direct-select aspect ratios or move the menu cursor up in the OSD. When no

menus are present on-screen, the UP button toggles through aspect ratios in the

following order:

Native - Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9

10. ENTER BUTTON

When an item is highlighted on the OSD, the ENTER button selects the item.

11. STANDBY LED

Lights amber when the DHD Controller is in standby mode; otherwise it is off.

2.4

DHD Controller Rear

Panel

Figure 2-4 shows the rear connector panel on the DHD Controller.

Figure 2-4. DHD Controller Rear Panel

Outputs1. HDMI Out

Connect this to the HDMI connector on the VX-6000d (see Figure 2-2).

2. Display Control

Connect this to the RS-232 port on the VX-6000d, using the provided

communication cable.

3. TRIGGERS

Connection for up to three (3), 12-volt trigger-controlled devices. Output current is

limited to 250 milliamperes (mA).

5 6

414

1011

789

1213

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 111 112

Pas de commentaire

Runco VX-2i Spécifications Page 25