Runco LIGHTSTYLE LS-10D Manuel d'utilisateur télécharger pdf (Page 105)

Specifications

Runco LS-10d Installation/Operation Manual 89

PRE

IMINAR

7.2

DHD Controller

Specifications

Table 7-2 lists the DHD Controller specifications.

Table 7-2. DHD Controller Specifications

Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,

Native

Video Standards: NTSC, PAL, SECAM, ATSC

Inputs: (3) Composite

(1) Component/SCART (3 x RCA)

(2) Component/RGBHV (5 x BNC)

(4) HDMI with HDCP

Output: HDMI with HDCP

Control Options: - Consumer Electronics Control (CEC) protocol support

via HDMI

- Discrete infrared remote

- Serial commands via RS-232

- Front-panel controls

RS-232 Communication

Parameters:

19200 bps, no parity, 8 data bits, 1 stop bit, no flow control

Trigger Outputs: (3) +12 VDC, each rated at 250 mA and thermal

fuse-protected

Bandwidth: 150 Mega Samples per Second (MSPS)

Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 160 watts

Operating Environment: 41°F to 95°F (5°C to 35°C), 0% to 90% humidity

(non-condensing)

Dimensions: Width = 17.50 inches (444.5 mm)

Depth = 11.19 inches (284.1 mm)

Height = 3.75 inches (95.3 mm)

Weight: 13.0 lbs. (5.90 kg)

Regulatory Approvals: Complies with FCC, CE C-Tick

Limited Warranty: Two (2) years parts and labor from the date of shipment from

Runco.

Specifications are subject to change without notice.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 111 112

Pas de commentaire

Runco LIGHTSTYLE LS-10D Manuel d'utilisateur Page 105