Runco CL-610LT CineWide Spécifications télécharger pdf (Page 47)

Operation

Runco CL-610 Series Owner’s Operating Manual 35

PRE

IMINAR

Select Color from the Adjustment menu and press ENTER. While looking at the color bar

pattern through a blue filter, adjust the color saturation level until the outermost (gray and

blue) color bars appear to be a single shade of blue:

Tint: Tint or “hue” is essentially the ratio of red to green in the color portion of the image.

When tint is decreased, the image appears redder; when it is increased the image

appears greener. To set the tint, select Tint from the Adjustment menu and press ENTER.

While looking at the color bar pattern through a blue filter, adjust the tint level until the cyan

and magenta color bars (on either side of the green bar) appear to be a single shade of

blue.

Like the brightness and contrast controls, the color and tint controls

are interactive. A change to one may require a subtle change to the

other in order to achieve the optimum setting.

gray

yellow

cyan

green

magenta

red

blue

Note

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 75 76

Pas de commentaire

Runco CL-610LT CineWide Spécifications Page 47